 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T1210T-6I, T1220T-6I T1225T-6I, T1235T-6I www..com Entry level SnubberlessTM, logic level and standard 12 A TRIACs A2 Features Medium current TRIAC High static and dynamic commutation Low thermal resistance with clip bonding Packages is RoHS (2002/95/EC) compliant VRM = 600 V Insulated packaged rated at 2500 V rms A1 A2 G G A1 Applications Entry-level and value-sensitive applications General purpose AC line load switching Motor control circuits in power tools Small home appliances, lighting Inrush current limiting circuits Overvoltage crowbar protection Table 1. TO-220AB insulated (T12xxT-6I) Device summary Symbol IGT 3Q Snubberless IGT 4Q standard IGT 3Q logic level Value 20 / 35 mA 25 mA 10 mA Order code T1220T-6I T1235T-6I T1225T-6I T1210T-6I Description Available in through-hole, the T12T series of TRIACs can be used as on/off or phase angle control function in general purpose AC switching where high commutation capability is required. Initially planned for power tools (T series) equipment, this series can be used in many value sensitive appliances thanks to the guidance on parameters provided in the following pages. TM: Snubberless is a trademark of STMicroelectronics March 2009 Rev 1 1/9 www.st.com 9 Characteristics T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I 1 www..com Characteristics Absolute maximum ratings (limiting values; Tj = 25 C, unless otherwise specified) Parameter On-state rms current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT tr 100 ns Non repetitive surge peak off-state voltage Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range F = 50 Hz F = 60 Hz tp = 10 ms F = 60 Hz tp = 10 ms tp = 20 s Tj = 125 C Tj = 25 C Tj = 125 C Tj = 125 C Tc = 88 C tp = 20 ms tp = 16.7 ms Value 12 90 A 95 60 50 VDRM/VRRM + 100 4 1 - 40 to + 150 - 40 to + 125 As A/s V A W C C Unit A Table 2. Symbol IT(RMS) ITSM I t dI/dt VDSM / VRSM IGM PG(AV) Tstg Tj 2/9 T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I Table 3. Symbol www..com Characteristics Electrical characteristics (Tj = 25 C, unless otherwise specified) T12xxT Test conditions Quadrant T1210T T1220T T1225T T1235T I - II - III MAX. IV ALL ALL MAX. MIN. MAX. I - III 10 20 MAX. 30 100 MIN. 50 7 Tj = 125 C MIN. (dV/dt)c = 0.1 V/s (dV/dt)c = 10 V/s Without snubber Tj = 150 C(3) 3 1 3 3 1 10 3 6 500 50 7 3 12 A/ms 1000 40 1000 15 35 1.3 0.2 20 40 40 60 100 80 2000 V/s 30 50 mA 40 V V mA 10 20 25 35 mA Unit IGT (1) VGT VGD IH (2) VD = 12 V RL = 30 VD = VDRM, RL = 3.3 k, Tj = 25 C VD = VDRM, RL = 3.3 k, Tj = 125 C IT = 500 mA IL IG = 1.2 IGT IV II dV/dt (2) VD = 67% VDRM, gate open (dV/dt)c = 0.1 V/s (dV/dt)c = 10 V/s Tj = 125 C Tj = 150 C(3) (di/dt)c (2) Without snubber 1. Minimum IGT is guaranted at 5% of IGT max. 2. For both polarities of A2 referenced to A1. 3. Derating information for excess temperature above Tj max. Table 4. Symbol VT (1) VTO (1) RD (1) Static characteristics Test conditions ITM = 17 A, tp = 380 s Threshold voltage Dynamic resistance VDRM = VRRM VD = 0.9 x VDRM Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C Tj = 150 C(2) Typ. Max. Max. Max. Max. 1 mA 1.9 Value 1.55 0.85 35 5 Unit V V m A IDRM IRRM 1. For both polarities of A2 referenced to A1. 2. Derating information for excess temperature above Tj max. 3/9 Characteristics Table 5. Symbol Rth(j-c) www..com T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I Thermal resistance Parameter Junction to case (AC) Junction to ambient (DC) Value 2.6 60 Unit C/W C/W Rth(j-a) Figure 1. P(W) Maximum power dissipation versus Figure 2. rms on-state current (full cycle) 13 On-state rms current versus case temperature (full cycle) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 IT(RMS) (A) =180 =180 12 11 10 9 8 7 6 180 5 4 3 2 1 IT(RMS)(A) 0 1 2 3 4 5 6 7 8 9 10 11 12 0 0 25 50 75 100 TC(C) 125 Figure 3. On-state rms current versus ambient temperature Figure 4. Relative variation of thermal impedance versus pulse duration Zth(j-c) 3.0 IT(RMS) (A) =180 1.0E+00 K=[Zth/Rth] Zth(j-a) 2.5 2.0 1.0E -01 1.5 1.0 0.5 0.0 Ta (C) 0 25 50 75 100 125 1.0E -02 1.0E -03 1.0E -02 1.0E -01 1.0E+00 1.0E+01 1.0E+02 tP(s) 1.0E+03 Figure 5. ITM (A) On state characteristics (maximum values) Figure 6. Surge peak on state current versus number of cycles 100 100 90 80 70 60 10 50 40 Tj=125 C Tj max : Vto = 0.85 V Rd = 35 m ITSM (A) t=20ms One cycle Non repetitive Tj initial=25C 30 20 Tj=25 C Repetitive TC=88 C 10 VTM (V) 2 3 4 Number of cycles 0 5 1 10 100 1000 1 0 1 4/9 T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I Characteristics Figure 7. Non repetitive surge peak on state current for a sinusoidal Figure 8. Relative variation of gate trigger current and gate trigger voltage versus junction temperature ITSM (A), www..com It (As) 1000 Tj initial=25C ITSM 3.0 IGT, VGT [Tj] / IGT, VGT [Tj=25 C] typical values 2.5 dI/dt limitation: 50 A/s IGT Q3 IGT Q1-Q2 2.0 100 It 1.5 1.0 VGT Q1-Q2-Q3 0.5 pulse with width tp < 10 ms and corresponding value of I T 10 0.01 0.10 1.00 2 tP(ms) 10.00 0.0 - 50 Tj(C) -25 0 25 50 75 100 125 Figure 9. Relative variation of holding Figure 10. Relative variation of critical rate of current and latching current versus decrease of main current versus junction temperature (dV/dt)c 7 typical values 6 2.5 IH, IL [T j] / IH, IL [T j=25 C] dV/dt [T j] / dV/dt [T j=125 C] typical values Logic Level and Snubberless types VD=VR=402 V 2.0 5 1.5 4 3 IL 1.0 2 1 0.5 IH Tj(C) 0.0 -50 -25 0 25 50 75 100 125 0 25 50 75 100 T j(C) 125 Figure 11. Relative variation of critical rate of decrease of main current versus junction temperature 8 7 6 Figure 12. Leakage current versus junction temperature for different values of blocking voltage (typical values) 1.0E+00 (dI/dt) C [T j] / (dI/dt) c [T j=125 C] IDRM/IRRM [Tj;V DRM/ VRRM]/IDRM/IRRM [Tj=125C;7 00V] VDRM=VRRM =600 V VDRM=VRRM =400 V 1.0E-01 5 4 3 1.0E-02 VDRM=VRRM =200 V 2 1 0 25 T j(C) 50 75 100 125 1.0E-03 25 50 75 100 T j(C) 125 5/9 Ordering information scheme T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I 2 www..com Ordering information scheme Figure 13. Ordering information scheme T TRIAC Current 12 = 12 A Sensitivity 10 = 10 mA 20 = 20 mA 25 = 25 mA 35 = 35 mA Application specific Voltage 6 = 600 V Package I = TO-220AB-Ins. 12 10 T - 6 I 6/9 T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I Package mechanical data 3 www..com Package mechanical data Epoxy meets UL94, V0 Recommended torque: 0.4 to 0.6 N*m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. TO-220AB insulated dimensions Dimensions Ref. Millimeters Min. A a1 B OI L F A I4 l3 a1 l2 c2 b2 C Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.90 0.598 a2 B b1 b2 C c1 c2 14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.094 0.244 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151 a2 e M F c1 b1 e OI I4 L l2 l3 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 1.70 1.70 0.104 0.044 0.044 0.102 0.116 0.066 0.066 7/9 Ordering Information T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I 4 www..com Ordering Information Table 7. Ordering information Marking T1210T-6I T1220T-6I TO-220AB-ins. T1225T-6I T1235T-6I T1225T-6I T1235T-6I 2.3 g 50 Tube Package Weight Base qty Delivery mode Order code T1210T-6I T1220T-6I 5 Revision history Table 8. Date 23-Mar-2009 Document revision history Revision 1 Initial release. Changes 8/9 T1210T-6I, T1220T-6I, T1225T-6I, T1235T-6I www..com Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of T1210T-6I
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |